TP-Link T1500 Series User Manual page 410

Hide thumbs Also See for T1500 Series:

Table of Contents

Configuring LLDP

Figure 6-2 LLDP Global Config

2) Choose the menu L2 FEATURES > LLDP > LLDP Config > Port Config to load the

following page. Set the Admin Status of port Fa1/0/1 as Tx&Rx, enable Notification

Mode and configure all the TLVs included in the outgoing LLDP packets.

Figure 6-3 LLDP Port Config

6.5 Using CLI

1) Enable LLDP globally and configure the corresponding parameters.

Switch_A#configure

Configuration Example

Configuration Guide