TP-Link T1500 Series User Manual page 53

Hide thumbs Also See for T1500 Series:

Table of Contents

Managing System

Address Mode

2) Configure IPv6 global address of the interface via following three ways:

Via RA Message:

Enable global

address auto

configuration via

Via DHCPv6 Server:

Enable global

address auto

configuration via

DHCPv6 Server

In the Global Address Config section, click

address to the interface.

Displays the Management VLAN ID. Only the computers in the management

VLAN can access the management interface of the switch. By default, VLAN 1

owning all the ports is the management VLAN and you can access the switch via

Enable the IPv6 feature of the management interface.

Select the link-local address configuration mode.

Manual: With this option selected, you can assign a link-local address manually.

Auto: With this option selected, the switch generates a link-local address

automatically.

Enter a link-local address if you choose "Manual" as the Link-Local Address

Displays the status of the link-local address. An IPv6 address cannot be used

before pass the DAD (Duplicate Address Detection), which is used to detect the

address conflicts. In the DAD process, the IPv6 address may in three different

Normal: Indicates that the link-local address passes the DAD and can be used

Try: Indicates that the link-local address is in the progress of DAD and cannot be

used right now.

Repeat: Indicates that the link-local address is duplicated, this address is already

used by another node and cannot be used by the interface.

With this option enabled, the interface automatically generates a global address

and other information according to the address prefix and other configuration

parameters from the received RA (Router Advertisement) message.

With this option enabled, the switch will try to obtain the global address from the

DHCPv6 Server.

System Info Configurations

to manually assign an IPv6 global

Configuration Guide