Table of Contents
Advertisement
Configuring ACL
4) In the Policy section, enable or disable the Rate Limit feature for the matched packets.
With this option enabled, configure the related parameters.
Figure 2-7 Configuring Rate Limit
Rate
Burst Size
Out of Band
5) In the Policy section, enable or disable the QoS Remark feature for the matched
packets. With this option enabled, configure the related parameters, and the remarked
values will take effect in the QoS processing on the switch.
Figure 2-8 Configuring QoS Remark
DSCP
Local Priority
802.1p Priority
6) Click Apply.
Specify the transmission rate for the matched packets.
Specify the maximum number of bytes allowed in one second.
Select the action for the packets whose rate is beyond the specified rate.
None: The packets will be forwarded normally.
Drop: The packets will be discarded.
Specify the DSCP field for the matched packets. The DSCP field of the
packets will be changed to the specified one.
Specify the local priority for the matched packets. The local priority of the
packets will be changed to the specified one.
Specify the 802.1p priority for the matched packets. The 802.1p priority of
the packets will be changed to the specified one.
ACL Configuration
Configuration Guide
577
Advertisement
Table of Contents
