Table of Contents
Advertisement
Configuring Spanning Tree
Figure 5-13 Enable Spanning Tree Function on Ports
2) Choose the menu Spanning Tree > MSTP Instance > Region Config to load the
following page. Set the region name as 1 and the revision level as 100. Click Apply.
Figure 5-14 Configuring the Region
3) Choose the menu L2 FEATURES > Spanning Tree > MSTP Instance > Instance Config.
Click Add, map VLAN101-VLAN103 to instance 1 and set the priority as 32768; map
VLAN104-VLAN106 to instance 2 and set the priority as 0. Click Create.
Figure 5-15 Configuring the VLAN-Instance Mapping
4) Choose the menu L2 FEATURES > Spanning Tree > STP Instance > STP Config to load
the following page. Enable MSTP function globally, here we leave the values of the other
global parameters as default settings. Click Apply.
Configuration Example for MSTP
Configuration Guide
350
Advertisement
Table of Contents
