Configuration Examples; Example For Port Isolation; Network Requirements; Configuration Scheme - TP-Link T1500 Series User Manual

Hide thumbs Also See for T1500 Series:

Table of Contents

Managing Physical Interfaces

Configuration Examples

As shown below, three hosts and a server are connected to the switch and all belong to

VLAN 10. Without changing the VLAN configuration, Host A is not allowed to communicate

with the other hosts except the server, even if the MAC address or IP address of Host A is

Figure 5-1 Network Topology

You can configure port isolation to implement the requirement. Set port 1/0/4 as the only

forwarding port for port 1/0/1, thus forbidding Host A to forward packets to the other

Since communications are bidirectional, if you want Host A and the server to communicate

normally, you also need to add port 1/0/1 as the forwarding port for port 1/0/4.

Demonstrated with T1500G-10PS, the following sections provide configuration procedure

in two ways: using the GUI and using the CLI.

1) Choose the menu L2 FEATURES > Switching > Port > Port Isolation to load the

following page. It displays the port isolation list.

Configuration Examples

Configuration Guide