Table of Contents
Advertisement
Configuring 802.1Q VLAN
2.1.2 Configuring the VLAN
Choose the menu L2 FEATURES > VLAN > 802.1Q VLAN > VLAN Config and click
to load the following page.
Figure 2-2 Configuring VLAN
Follow these steps to configure VLAN:
1) Enter a VLAN ID and a description for identification to create a VLAN.
VLAN ID
VLAN Name
2) Select the untagged port(s) and the tagged port(s) respectively to add to the created
VLAN based on the network topology.
Untagged port
Enter a VLAN ID for identification with the values between 2 and 4094.
Give a VLAN description for identification with up to 16 characters.
The selected ports will forward untagged packets in the target VLAN.
802.1Q VLAN Configuration
Configuration Guide
144
Advertisement
Table of Contents
