Table of Contents
Advertisement
Configuring ACL
Here you can view and edit the ACL rules. You can also click Resequence to resequence
the rules by providing a Start Rule ID and Step value.
2.1.4 Configuring ACL Binding
You can bind the ACL to a port or a VLAN. The received packets on the port or in the VLAN
will then be matched and processed according to the ACL rules. An ACL takes effect only
after it is bound to a port or VLAN.
Note:
Different types of ACLs cannot be bound to the same port or VLAN.
•
Multiple ACLs of the same type can be bound to the same port or VLAN. The switch matches
•
the received packets using the ACLs in order. The ACL that is bound earlier has a higher
priority.
Binding the ACL to a Port
Choose the menu SECURITY > ACL > ACL Binding > Port Binding and click
load the following page.
Figure 2-28 Binding the ACL to a Port
Follow these steps to bind the ACL to a Port:
1) Choose ID or Name to be used for matching the ACL. Then select an ACL from the
drop-down list.
2) Specify the port to be bound.
3) Click Create.
ACL Configuration
to
Configuration Guide
591
Advertisement
Table of Contents
