TP-Link T1500 Series User Manual page 40

Hide thumbs Also See for T1500 Series:

Table of Contents

Accessing the Switch

Command Line Interface Access

switch. Only the computers in the management VLAN can access the management

interface of the switch. By default, VLAN 1 owning all the ports is the management

VLAN and you can access the switch via any port. By default, the system IP address is

192.168.0.1, and the switch has no default gateway. The following example shows how to

configure the switch's IP address as 192.168.0.10/24 and configure the default gateway as

192.168.0.100.

Switch#configure

Switch(config)#interface vlan 1

Switch(config-if)#ip address 192.168.0.10 255.255.255.0 gateway 192.168.0.100

The connection will be interrupted and you should telnet to the switch's new IP address

192.168.0.10.

C:\Users\Administrator>telnet 192.168.0.10

Password:admin

Switch>enable

Switch#copy running-config startup-config

Configuration Guide