TP-Link T1500 Series User Manual page 396

Hide thumbs Also See for T1500 Series:

Table of Contents

Configuring LLDP

TTL Multiplier:

Initialization Delay:

Trap Notification Interval:

Fast-packet Count:

LLDP-MED Fast Start Repeat Count:

Switch(config)#end

Switch#copy running-config startup-config

3.2.2 Port Config

Select the desired port, enable LLDP-MED and select the TLVs (Type/Length/Value)

included in the outgoing LLDP packets according to your needs.

Enter global configuration mode.

interface {fastEthernet port | range fastEthernet port-list | gigabitEthernet port | range

gigabitEthernet port-list | ten-gigabitEthernet port | range ten-gigabitEthernet port-list ]

Enter interface configuration mode.

lldp med-status

(Optional) Enable the LLDP-MED on the port. It is disabled by default.

lldp med-tlv-select { [ inventory-management] [location] [network-policy]

[power-management] [all ] }

(Optional) Configure the LLDP-MED TLVs included in the outgoing LLDP packets. By default,

the outgoing LLDP packets include all TLVs.

If LLDP-MED Location TLV is selected, configure the parameters as follows:

lldp med-location {emergency-number identifier | civic-address [language language |

province-state province-state | lci-county-name county | lci-city city | street street | house-

number house-number | name name | postal-zipcode postal-zipcode | room-number room-

number | post-office-box post-office-box | additional additional | country-code country-

code | what { dhcp-server | endpoint | switch } ] }

Configure the LLDP-MED Location TLV included in the outgoing LLDP packets. Used to

assign the location identifier information to the Endpoint devices.

Configure the emergency number to call CAMA or PSAP. The number should

contain 10-25 characters.

language, province-state, county.etc:

show lldp interface { fastEthernet port | gigabitEthernet port | ten-gigabitEthernet port }

Display LLDP configuration of the corresponding port.

Configure the address in the IETF defined address

LLDP-MED Configurations

Configuration Guide