Table of Contents
Advertisement
Configuring Access Security
2) In the Entry Table section, click
When the IP-based mode is selected, the following window will pop up.
Figure 2-2 Configuring Access Control Entry-IP Based
Access
Interface
IP Address/
Mask
When the MAC-based mode is selected, the following window will pop up.
Figure 2-3 Configuring Access Control Entry-MAC Based
Select the interface to control the methods for users' accessing.
SNMP: A function to manage the network devices via NMS.
Telnet: A connection type for users to remote login.
SSH: A connection type based on SSH protocol.
HTTP: A connection type based on HTTP protocol.
HTTPS: A connection type based on SSL protocol.
Ping: A communication protocol to test the connection of the network.
Enter the IP address and mask to specify an IP range. Only the users within this IP
range can access the switch.
to add an Access Control entry.
Access Security Configurations
Configuration Guide
492
Advertisement
Table of Contents
