TP-Link T1500 Series User Manual page 577

Configuring 802.1x
Step 12
Step 13
The following example shows how to enable 802.1x authentication on port 1/0/2, configure
the control type as port-based, and keep other parameters as default:
Switch#configure
Switch(config)#interface gigabitEthernet 1/0/2
Switch(config-if)#dot1x
Switch(config-if)#dot1x port-method port-based
Switch(config-if)#show dot1x interface gigabitEthernet 1/0/2
Port State
---- -----
Gi1/0/2 disabled
MaxReq QuietPeriod SuppTimeout Authorized
------ -----------
3 10
Switch(config-if)#end
Switch#copy running-config startup-config
2.2.4 Viewing Authenticator State
You can view the authenticator state. If needed, you can also initialize or reauthenticate the
specific client:
Step 1
Step 2
end
Return to privileged EXEC mode.
copy running-config startup-config
Save the settings in the configuration file.
MAB State
---------
disabled
-----------
3
show dot1x auth-state [interface fastEthernet port | interface gigabitEthernet port ]
Displays the authenticator state.
configure
Enter global configuration mode.
GuestVLAN PortControl
--------- -----------
0 auto
LAG
---------- ---
unauthorized N/A
802.1x Configuration
PortMethod
----------
port-based
Configuration Guide 555