Table of Contents
Advertisement
Configuring LLDP
Civic Address
3.2
Using the CLI
3.2.1 Global Config
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
The following example shows how to configure LLDP-MED fast count as 4:
Switch#configure
Switch(config)#lldp
Switch(config)#lldp med-fast-count 4
Switch(config)#show lldp
LLDP Status:
Tx Interval:
Configure the address of the audio device in the IETF defined address format.
What: Specify the role type of the local device, DHCP Server, Switch or LLDP-MED
Endpoint.
Country Code: Enter the country code defined by ISO 3166 , for example, CN, US.
Language, Province/State etc.: Enter the regular details.
configure
Enter global configuration mode.
lldp
Enable the LLDP feature on the switch.
lldp med-fast-count count
(Optional) Specify the number of successive LLDP-MED frames that the local device
sends when fast start mechanism is activated. When the fast start mechanism is activated,
the local device will send the specified number of LLDP packets carrying LLDP-MED
information.
The valid value are from 1 to 10. The default is 4.
count:
show lldp
Display the LLDP information.
end
Return to Privileged EXEC Mode.
copy running-config startup-config
Save the settings in the configuration file.
Enabled
30 seconds
LLDP-MED Configurations
Configuration Guide
373
Advertisement
Table of Contents
