Table of Contents
Advertisement
Configuring LLDP
Follow these steps to view the local information:
1) In the Auto Refresh section, enable the Auto Refresh feature and set the Refresh Rate
according to your needs. Click Apply.
2) In the Local Info section, select the desired port and view its associated local device
information.
Local Interface
Chassis ID Subtype
Chassis ID
Port ID Subtype
Port ID
TTL
Port Description
System Name
System Description
System Capabilities
Supported
System Capabilities
Enabled
Management
Address Type
Management
Address
Management
Address Interface
Type
Management
Address Interface
ID
Management
Address OID
Port VLAN ID(PVID)
Port And Protocol
VLAN ID(PPVID)
Displays the local port ID.
Displays the Chassis ID type.
Displays the value of the Chassis ID.
Displays the Port ID type.
Displays the value of the Port ID.
Specify the amount of time in seconds the neighbor device should hold the
received information before discarding it.
Displays the description of the local port.
Displays the system name of the local device.
Displays the system description of the local device.
Displays the supported capabilities of the local system.
Displays the primary functions of the local device.
Displays the management IP address type of the local device.
Displays the management IP address of the local device.
Displays the interface numbering type that is used to define the interface ID.
Displays the interface ID that is used to identify the specific interface
associated with the MAC address of the local device.
Displays the OID (Object Identifier) of the local device. A value of 0 means that
the OID is not provided.
Displays the PVID of the local port.
Displays the PPVID of the local port.
Viewing LLDP Settings
Configuration Guide
378
Advertisement
Table of Contents
