TP-Link T1500 Series User Manual page 685

Hide thumbs Also See for T1500 Series:

Table of Contents

Configuring IPv6 IMPB

2) In the VLAN Config section, enable ND Detection on the selected VLANs. Click Apply.

3.1.3 Configuring ND Detection on Ports

Choose the menu SECURITY > IPv6 IMPB > ND Detection >Port Config to load the

following page.

Figure 3-2 ND Detection on Port

Follow these steps to configure ND Detection on ports:

1) Select one or more ports and configure the parameters.

Trust Status

2) Click Apply.

Displays the VLAN ID.

Enable or disable ND Detection on the VLAN.

Enable or disable Log feature on the VLAN. With this feature enabled, the switch

generates a log when an illegal ND packet is discarded.

Displays the port number.

Enable or disable this port to be a trusted port. On a trusted port, the ND packets

are forwarded directly without checked. The specific ports, such as up-link ports

and routing ports are suggested to be set as trusted.

Displays the LAG that the port is in.

ND Detection Configuration

Configuration Guide