TP-Link T1500 Series User Manual page 206

Hide thumbs Also See for T1500 Series:

Table of Contents

Configuring Protocol VLAN

1) Create VLAN 10 and VLAN 20 and add each port to the corresponding VLAN.

2) Use the IPv4 protocol template provided by the switch, and create the IPv6 protocol

3) Bind the protocol templates to the corresponding VLANs to form protocol groups, and

add port 1/0/1 to the groups.

For Switch 1, configure 802.1Q VLAN according to the network topology.

Demonstrated with T1500-28PCT, this chapter provides configuration procedures in two

ways: using the GUI and using the CLI.

Configuration Example

Configuration Guide