TP-Link T1500 Series User Manual page 661

Hide thumbs Also See for T1500 Series:

Table of Contents

Configuring IPv4 IMPB

3) Configure ARP Detection on ports. Since port 1/0/3 is connected to the gateway router,

set port 1/0/3 as trusted port. To prevent ARP flooding attacks, limit the speed of

receiving the legal ARP packets on all ports.

Demonstrated with T1500-28PCT, the following sections provide configuration procedure

in two ways: using the GUI and using the CLI.

5.1.3 Using the GUI

1) Choose the menu SECURITY > IPv4 IMBP > IP-MAC Binding > Manual Binding and

and VLAN ID of User 1, select the protect type as ARP Detection, and select port 1/0/1

on the panel. Click Apply.

Figure 5-2 Binding Entry for User 1

2) On the same page, add a binding entry for User 2. Enter the host name, IP address, MAC

address and VLAN ID of User 2, select the protect type as ARP Detection, and select

port 1/0/2 on the panel. Click Apply.

to load the following page. Enter the host name, IP address, MAC address

Configuration Examples

Configuration Guide