Table of Contents
Advertisement
Configuring Protocol VLAN
DSAP
SSAP
2) Click Create.
Note:
A protocol template that is bound to a VLAN cannot be deleted.
2.1.3 Configuring Protocol VLAN
Choose the menu L2 FEATURES > VLAN > Protocol VLAN > Protocol VLAN Group and
click
Figure 2-3 Configure the Protocol VLAN Group
Follow these steps to configure the protocol group:
1) In the Protocol Group Config section, specify the following parameters.
Template Name
VLAN ID/Name
Enter the DSAP value for the protocol template. It is available when LLC is
selected. It is the DSAP field in the frame and is used to identify the data type of
the frame.
Enter the SSAP value for the protocol template. It is available when LLC is
selected. It is the SSAP field in the frame and is used to identify the data type of
the frame.
to load the following page.
Select the previously defined protocol template.
Enter the ID number or name of the 802.1Q VLAN that will be bound to the
Protocol VLAN..
Protocol VLAN Configuration
Configuration Guide
178
Advertisement
Table of Contents
