Table of Contents
Advertisement
Configuring LLDP
Step 6
Step 7
The following example shows how to enable LLDP-MED on port 1/0/1, configure the LLDP-
MED TLVs included in the outgoing LLDP packets.
Switch(config)#lldp
Switch(config)#lldp med-fast-count 4
Switch(config)#interface gigabitEthernet 1/0/1
Switch(config-if)#lldp med-status
Switch(config-if)#lldp med-tlv-select all
Switch(config-if)#show lldp interface gigabitEthernet 1/0/1
LLDP interface config:
gigabitEthernet 1/0/1:
Admin Status: TxRx
SNMP Trap: Enabled
TLV Status
--- ------
Port-Description
System-Capability
System-Description
System-Name
Management-Address Yes
Port-VLAN-ID Yes
Protocol-VLAN-ID Yes
VLAN-Name Yes
Link-Aggregation Yes
MAC-Physic Yes
Max-Frame-Size
Power
end
Return to Privileged EXEC Mode.
copy running-config startup-config
Save the settings in the configuration file.
Yes
Yes
Yes
Yes
Yes
Yes
LLDP-MED Configurations
Configuration Guide
375
Advertisement
Table of Contents
