TP-Link T1500 Series User Manual page 805

Hide thumbs Also See for T1500 Series:

Table of Contents

Configuring SNMP & RMON

Configuration Example

Network Requirements

The following figure shows the network topology of a company. The company has

requirements as follows:

1) Monitor traffic flow of ports 1/0/1 and 1/0/2 on Switch A, and send notifications to the

NMS when the actual rate of transmitting and receiving packets exceeds the preset

2) Monitor the sending status of ports 1/0/1 and 1/0/2 on Switch A, and regularly collect

and save data for follow-up checks. Specifically, during the sample interval, switch A

should notify the NMS when the number of packets transmitted and received on the

port exceeds the preset threshold; Switch A should record but not notify the NMS when

the number of packets transmitted and received is below the threshold.

The NMS host with IP address 192.168.1.222 is connected to the core switch, Switch B.

Switch A is connected to Switch B via port 1/0/3. And port 1/0/3 and the NMS are able to

reach one another.

Figure 6-1 Network Topology

IP: 192.168.1.222

Configuration Example

Configuration Guide