TP-Link T1500 Series User Manual page 446

Hide thumbs Also See for T1500 Series:

Table of Contents

Configuring QoS

Using the GUI

2.1.1 Configuring Port Priority

 Configuring the Trust Mode and Port to 802.1p Mapping

Choose the menu QoS > Class of Service > Port Priority to load the following page.

Figure 2-1 Configuring the Trust Mode and Port to 802.1p Mapping

Follow these steps to configure the parameters of the port priority:

1) Select the desired ports, specify the 802.1p priority and set the trust mode as

802.1p Priority

2) Click Apply.

Specify the port to 802.1p mapping for the desired port. The ingress packets from

one port are first mapped to 802.1p priority based on the port to 802.1p mapping,

then to TC queues based on the 802.1p to queue mapping. The untagged packets

from one port will be added an 802.1p priority value according to the port to

802.1p priority mapping.

Select the Trust mode as Untrusted. In this mode, the packets will be processed

according to the port priority configuration.

Class of Service Configuration

Configuration Guide