Configuring DoS Defend
Step 5
Step 6
The following example shows how to enable the DoS Defend type named land:
Switch#configure
Switch(config)#ip dos-prevent
Switch(config)#ip dos-prevent type land
Switch(config)#show ip dos-prevent
DoS Prevention State:
Type
----
Land Attack
Scan SYNFIN
Xmascan
NULL Scan
SYN sPort less 1024
Blat Attack
Ping Flooding
SYN/SYN-ACK Flooding
WinNuke Attack
Smurf Attack
Ping Of Death
Switch(config)#end
Switch#copy running-config startup-config
end
Return to privileged EXEC mode.
copy running-config startup-config
Save the settings in the configuration file.
Enabled
Status
------
Enabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
DoS Defend Configuration
Configuration Guide
709