TP-Link T1500 Series User Manual page 203

Configuring Protocol VLAN
Step 5
Step 6
Step 7
Step 8
The following example shows how to bind the IPv6 protocol template to VLAN 10 and add
port 1/0/2 to protocol VLAN:
Switch#configure
Switch(config)#show protocol-vlan template
Index Protocol Name
-------- ------------------ --------------------------------
1 IP
2 ARP
3 RARP
4 IPX
5 AT
6 IPv6
Switch(config)#protocol-vlan vlan 10 priority 5 template 6
Switch(config)#show protocol-vlan vlan
Index
--------
1
Switch(config)#interface gigabitEthernet 1/0/2
Switch(config-if)#protocol-vlan group 1
Switch(config-if)#show protocol-vlan vlan
interface {fastEthernet port | range fastEthernet port-list | gigabitEthernet port | range
gigabitEthernet port-list | ten-gigabitEthernet port | range ten-gigabitEthernet port-list |
port-channel port-channel-id | range port-channel port-channel-list }
Enter interface configuration mode.
protocol-vlan group entry-id
Add the specified port to the protocol group.
Protocol VLAN index.
entry-id:
end
Return to Privileged EXEC Mode.
copy running-config startup-config
Save the settings in the configuration file.
Protocol Type
EthernetII ether-type 0800
EthernetII ether-type 0806
EthernetII ether-type 8035
SNAP
SNAP
EthernetII ether-type 86DD
Protocol-Name
--------------------
IPv6
ether-type 8137
ether-type 809B
VID Priority Member
------ ------ ------
10 0
Protocol VLAN Configuration
Configuration Guide 181