Table of Contents
Advertisement
Managing System
Step 2
Use the following command to create an account unencrypted or symmetric encrypted.
user name name { privilege admin | operator | power_user | user } password { [ 0 ] password | 7
encrypted-password }
name
digits, English letters and underscore only.
admin | operator | power_user |
modify and view all the settings of different functions. Operator can edit, modify and view
mostly the settings of different functions. Power User can edit, modify and view some the
settings of different functions. User only can view the settings without the right to edit and
modify.: Select the access level for the user. Admin can edit, modify and view all the settings of
different functions.
0: Specify the encryption type. 0 indicates that the password you entered is unencrypted, and
the password is saved to the configuration file unencrypted. By default, the encryption type is 0.
password
or symbols. The password is case sensitive, allows digits, English letters (case sensitive),
underlines and sixteen special characters.
7: Specify the encryption type. 7 indicates that the password you entered is symmetric
encrypted, and the password is saved to the configuration file symmetric encrypted.
encrypted-password
copy from another switch's configuration file. After the encrypted password is configured, you
should use the corresponding unencrypted password to reenter this mode.
Use the following command to create an account MD5 encrypted.
user name name { privilege admin | operator | power_user | user } secret { [ 0 ] password | 5
encrypted-password }
Create an account whose access level is Admin.
name
digits, English letters and underscore only.
admin | operator | power_user |
modify and view all the settings of different functions. Operator can edit, modify and view
mostly the settings of different functions. Power User can edit, modify and view some the
settings of different functions. User only can view the settings without the right to edit and
modify.: Select the access level for the user. Admin can edit, modify and view all the settings of
different functions.
0: Specify the encryption type. 0 indicates that the password you entered is unencrypted, but
the password is saved to the configuration file MD5 encrypted. By default, the encryption type
is 0.
password
or symbols. The password is case sensitive, allows digits, English letters (case sensitive),
underlines and sixteen special characters.
5: Specify the encryption type. 5 indicates that the password you entered is MD5 encrypted,
and the password is saved to the configuration file MD5 encrypted.
encrypted-password
from another switch's configuration file.
Step 3
show user account-list
Verify the information of the current users.
: Enter a user name for users' login. It contains 16 characters at most, composed of
: Enter a password for users' login. It is a string from 1 to 32 alphanumeric characters
: Enter a symmetric encrypted password with fixed length, which you can
: Enter a user name for users' login. It contains 16 characters at most, composed of
: Enter a password for users' login. It is a string from 1 to 32 alphanumeric characters
: Enter a MD5 encrypted password with fixed length, which you can copy
user: Specify the access level for the user. Admin can edit,
user: Specify the access level for the user. Admin can edit,
User Management Configurations
Configuration Guide
47
Advertisement
Table of Contents
