Table of Contents
Advertisement
Managing System
Step 5
power inline profile name
Bind a PoE profile to the desired port. If one profile is selected, you will not be able to modify
PoE status, PoE priority or power limit manually.
name
double quotes.
Step 6
time-range name
Specify a time range for the port. Then the port will supply power only during the time range.
For how to create a time range, refer to
name:
Step 7
show power profile
Verify the defined PoE profile.
Step 8
show power inline configuration interface [ fastEthernet { port | port-list } | gigabitEthernet {
port | port-list } | ten-gigabitEthernet { port | port-list }]
Verify the PoE configuration of the corresponding port.
port
port-list
Step 9
show power inline information interface [ fastEthernet { port | port-list } | gigabitEthernet {
port | port-list } | ten-gigabitEthernet { port | port-list } ]
Verify the real-time PoE status of the corresponding port.
port
port-list
Step 10
end
Return to privileged EXEC mode.
Step 11
copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to create a profile named profile1and bind the profile to
the port 1/0/6.
Switch#configure
Switch(config)#power profile profile1 supply enable priority middle consumption class2
Switch(config)#show power profile
Index Name
-----
------------
1
profile1
Switch(config)#interface gigabitEthernet 1/0/6
: Specify the name of the PoE profile. If the name contains spaces, enclose the name in
Specify the name of the time range.
: Specify the Ethernet port number, for example 1/0/1.
: Specify the list of Ethernet ports, in the format of 1/0/1-3, 1/0/5.
: Specify the Ethernet port number, for example 1/0/1.
: Specify the list of Ethernet ports, in the format of 1/0/1-3, 1/0/5.
Status
Priority
---------- ---------
Enable
Middle
Time Range
Configuration.
Power-Limit(w)
--------------
Class2
PoE Configurations
Configuration Guide
74
Advertisement
Table of Contents
