Configuring Mtu Vlan - TP-Link Omada DS1024GE User Manual

Configuring VLAN
2

Configuring MTU VLAN

Choose the menu VLAN > MTU VLAN to load the following page.
Figure 2-1 Configuring MTU VLAN
Follow these steps to configure MTU VLAN:
1) Select MTU VLAN configuration as Enable. Click Apply.
MTU VLAN
Configuration
2) In the table below, change the uplink port from the drop-down list according to your
needs. Click Apply.
Change Uplink
Port
Enable or disable the MTU VLAN mode.
Select the desired uplink port from the drop-down list. The uplink port will
build up several VLANs with each of the other ports.
Configuring MTU VLAN
User Guide 48