Related Manuals for Fujitsu ADA-16FX
Summary of Contents for Fujitsu ADA-16FX
-
Page 1: User Guide
Fujitsu Microelectronics Europe FMEMCU-UG-960011-11 User Guide F²MC-16FX FAMILY ADAPTER BOARD ADA-16FX-ETHERNET USER GUIDE... -
Page 2: Revision History
Revision History Date 11.01.2008 V1.0, TKi, First Release 04.09.2008 V1.1, MSc, China-RoHS regulation added This document contains 17 pages. UG-960011-11 ADA-16FX-ETHERNET Revision History Issue - 2 - © Fujitsu Microelectronics Europe GmbH... -
Page 3: Warranty And Disclaimer
Warranty and Disclaimer To the maximum extent permitted by applicable law, Fujitsu Microelectronics Europe GmbH restricts its warranties and its liability for the ADA-16FX-ETHERNET Board and all its deliverables (eg. software include or header files, application examples, target boards, evaluation boards, engineering samples of IC’s etc.), its performance and any consequential damages, on the use of the Product in... -
Page 4: Table Of Contents
WARRANTY AND DISCLAIMER ... 3 1 CONTENTS... 4 2 OVERVIEW ... 5 Abstract... 5 Features of adapter board ADA-16FX-ETHERNET ... 5 Features of base board SK-16FX-EUROSCOPE (SK-16FX-100PMC)... 5 3 INSTALLATION ... 6 Jumper settings of ADA-16FX-ETHERNET ... 7 4 JUMPERS AND LED’S ... 8 Chip select (JP: 1, 2, 3) ... -
Page 5: Overview
2 Overview 2.1 Abstract The ADA-16FX-ETHERNET is an adapter board that can be used together with the evaluation board SK-16FX-EUROSCOPE (SK-16FX-100PMC). The ADA-16FX-ETHERNET extends the evaluation board with Ethernet connectivity. It can be used for software development and testing. The board allows the designer immediately to start with the software development before a final target system is available. -
Page 6: Installation
Attach the adapter board to the evaluation board as shown below. The Ethernet jack has to face to the outer edge. Ethernet jack Note: Make sure to jumper the board to 5V before connecting the ADA-16FX-ETHERNET. UG-960011-11 ADA-16FX-ETHERNET Chapter 3 Installation... -
Page 7: Jumper Settings Of Ada-16Fx-Ethernet
3.1 Jumper settings of ADA-16FX-ETHERNET The following jumper settings are set by default: Jumper Description / Function Use chip select line 2 Use chip select line 3 Use chip select line 4 Select center tap A of Ethernet jack Select center tap B of Ethernet jack Please refer to the documentation of the evaluation board for detailed information about the jumper settings for the SK-16FX-EUROSCOPE (SK-16FX-100PMC). -
Page 8: Jumpers And Led's
Capacitor 9 is connected to pin 7 of the Ethernet jack Capacitor 10 is connected to pin 5 of the Ethernet jack Capacitor 10 is connected to pin 8 of the Ethernet jack - 8 - © Fujitsu Microelectronics Europe GmbH... -
Page 9: Link Led, Activity Led (Link, Act)
Colour LINK Green Yellow By default the LINK LED should light directly after connected to a network. © Fujitsu Microelectronics Europe GmbH ADA-16FX-ETHERNET Chapter 4 Jumpers and LED’s Description Indicates that a link is established Indicates activity on the Ethernet... -
Page 10: Connectors
Connectors 5.1 Ethernet connector (X1) This is the Ethernet jack for connecting the ADA-16FX-ETHERNET to the Ethernet. The connector complies with the 10BaseT standard. The used connector has integrated transformers for transmit and receive lines. The Ethernet jack and the Ethernet controller depends on the power supply voltage:... -
Page 11: Silk-Plot Of The Board
6 Silk-Plot of the Board Ethernet connector © Fujitsu Microelectronics Europe GmbH ADA-16FX-ETHERNET Chapter 6 Silk-Plot of the Board Latch Cirrus CS8900A Latch - 11 - UG-960011-11... -
Page 12: Related Products
7 Related Products < SK-16FX-EUROSCOPE < ADA-16FX-ETHERNET < MB96F348HS UG-960011-11 ADA-16FX-ETHERNET Chapter 7 Related Products Evaluation board with MB96F348HS FPT-100P-M20 package Adapterboard for SK-16FX-EUROSCOPE (SK-16FX-100PMC) MB96340 Series Flash MCU - 12 - © Fujitsu Microelectronics Europe GmbH... -
Page 13: Information In The Www
Linear Products: Power Management, A/D and D/A Converters http://www.fujitsu.com/emea/services/microelectronics/linears/ Media Products: SAW filters, acoustic resonators and VCOs http://www.fujitsu.com/emea/services/microelectronics/saw/ For more information about FUJITSU MICROELECTRONICS http://www.fujitsu.com/emea/services/microelectronics/ © Fujitsu Microelectronics Europe GmbH ADA-16FX-ETHERNET Chapter 8 Information in the WWW - 13 -... - Page 14 ADA-16FX-ETHERNET Chapter 8 Information in the WWW UG-960011-11 - 14 - © Fujitsu Microelectronics Europe GmbH...
-
Page 15: China-Rohs Regulation
“Year”. © Fujitsu Microelectronics Europe GmbH - 15 - UG-960011-11... - Page 16 有毒有害物质 Hazardous substances name 汞 汞 汞 汞 镉 镉 镉 镉 六价铬 六价铬 六价铬 六价铬 (Hg) (Cd) (Cr(VI)) 。 - 16 - © Fujitsu Microelectronics Europe GmbH 多溴联苯 多溴联苯 多溴联苯 多溴联苯 多溴二苯醚 多溴二苯醚 多溴二苯醚 多溴二苯醚 (PBB) (PBDE) 标准规定的限量要求以下 标准规定的限量要求以下...
-
Page 17: Recycling
According to the European WEEE-Directive and its implementation into national laws we take this device back. For disposal please send the device to the following address: Fujitsu Microelectronics Europe GmbH Warehouse/Disposal Monzastraße 4a D-63225 Langen Germany © Fujitsu Microelectronics Europe GmbH - 17 - UG-960011-11...