Editing An Edid; Creating An Edid - Easy Edid Creator - Lightware MX2M-FR24R User Manual

   
7. Software Control - Lightware Device Controller
7.8.2. Editing an EDID
Select an EDID from Source panel and press Edit button to display Advanced EDID Editor window.
The editor can read and write all descriptors, which are defined in the standards, including the
additional CEA extensions. Any EDID from the device's memory or a saved EDID file can be loaded into the
editor. The software resolves the raw EDID and displays it as readable information to the user. All descriptors
can be edited, and saved in an EDID file, or uploaded to the User memory.
EDID Editor window
Applied firmware package: v1.0.0 | LDC software: v2.4.0b3
Hybrid Modular Matrix Switcher series – User's Manual
7.8.3. Creating an EDID - Easy EDID Creator
Since above mentioned Advanced EDID Editor needs more detailed knowledge about EDID,
EDIT
Lightware introduced a wizard-like interface for fast and easy EDID creation. With Easy EDID
Creator it is possible to create custom EDIDs in four simple steps. By clicking on the Create button below
Source panel, Easy EDID Creator is opened in a new window.
EDID Creator window
56
CREATE