Editing An Edid; Creating An Edid - Lightware MX-FR Series User Manual

   
6. Software Control – Lightware Device Controller Software
6.6.4. Editing an EDID
Select an DDID from Source panel and press Ddit button to display Advanced DDID Dditor window. The editor
can read and write all descriptors, which are defined in the standards, including the additional CEA extension.
Any EDID from the device's memory or a saved EDID file can be loaded into the editor.
The software resolves the raw DDID and displays it as readable information to the user. All descriptors can
be edited, and saved in an EDID file, or uploaded to the User memory. For more details about EDID Editor
please visit our website (www.lightware.com) and download DDID Dditor user's manual.
The EDID Editor Window
MX-FR Series Modular Matrix Frames – User's Manual
6.6.5. Creating an EDID
Since above mentioned Advanced DDID Dditor needs more complex knowledge about DDID, Lightware
introduced a wizard-like interface for fast and easy EDID creation. With Easy EDID Creator it is possible to
create custom DDIDs in four simple steps.
By clicking on the Create button below Source panel, Dasy DDID Creator is opened in a new window. For more
details about DDID Dditor please visit our website (www.lightware.com) and download DDID Dditor user's
manual.
The Easy EDID Creator Window
76