Editing An Edid; Creating An Edid - Lightware MX2-4x4-HDMI20-CA User Manual


  
6. Software Control – Lightware Device Controller
7.8.4. Editing an EDID
Select an EDID from the left panel and press the Edit button to display Advanced EDID Editor window. The editor
can read and write all descriptors, which are defined in the standards, including the additional CEA extension. Any
EDID from the device's memory or a saved EDID file can be loaded into the editor. The software resolves the raw
EDID and displays it as readable information to the user. All descriptors can be edited, and saved in an EDID file, or
uploaded to the User memory. For more details about EDID Editor please visit our website (www.lightware.com)
and download the EDID Editor User's Manual.
EDID Editor Window
Applied firmware package: v1.7.0 | LDC software: v2.5.1b5
MX2-HDMI20 series – User's Manual
7.8.5. Creating an EDID
Since above mentioned Advanced EDID Editor needs more complex knowledge about EDID, Lightware
introduced a wizard-like interface for fast and easy EDID creation. With Easy EDID Creator it is possible to
create custom EDIDs in four simple steps. By clicking on the Create button below the left panel, Easy EDID
Creator is opened in a new window.
Easy EDID Creator Wizard
62