Table of Contents
Advertisement
Overview
2
Overview
2.1
Device features
The safety laser scanners of the PSEN sc M 3/5 series are electrosensitive protective
equipment (ESPE type: 3) in accordance with EN 61496-3 for workspaces in which ma-
chines, robots, and automated systems could endanger the physical integrity of operators.
}
Four safety laser scanners can be connected in series (1 master and 3 slaves)
}
In a series connection with the master and slave units the devices can be combined
freely in the range and the assigned detection capability the PSENscan Configurator
}
Detection capability: 40 mm, 70 mm
}
2 protective zones independent of each other (one OSSD pair per protective zone)
}
LED display and display for status information
}
Scan angle: 275°
}
Infrared laser beams build up a 2-dimensional protected area
}
Separation of the protected area in a safety zone and a warning zone
}
Number of
– PSEN sc M with 8-pin connection = 3
– PSEN sc M with 12-pin connection= 10
}
Enhanced availability by configurable multiple evaluation
}
The safety laser scanner can be installed and operated overhead.
}
Muting
– Muting in one direction
– Muting in two directions
– Dynamic muting
Operating Manual PSEN sc M 3/5 series
1005055-EN-02
zone sets [
15]
that can be switched
| 9
Advertisement
Table of Contents
