Example For An 8-Pin Connection - Pilz PSEN sc M 3.0 08-12 Operating Manual

First commissioning
– Activation EDM
– Muting (per sensor one pin)
– Dynamic activation muting
– Activation override
– Override mode = Edge or signal
For simultaneous monitoring of several zones and the switching of monitoring of zone sets,
the configurable inputs of the safety laser scanner must be configured appropriately.
}
Configuration of a static zone set
No configurable inputs are required.
}
Configuration of two zone sets
Configure two configurable inputs.
}
Configuration of three zone sets
Configure three configurable inputs.
9.3.1

Example for an 8-pin connection

Sample settings in PSENscan Configurator for a safety laser scanner with 8‑pin connection:
Vertical application with reference outline monitoring, 1 zone set, one warning zone, auto-
matic restart, dynamic muting in one direction
Prerequisites
} The safety laser scanner is already connected to the 8-pin male connector.
Procedure:
1. From the start page, select Create new configuration.
The window Device selection is displayed with one tab each Online and Overview of
all types.
2. Select the connected device from Overview of all types. Double-click the device.
The device is displayed in the work window and it can be configured.
3. Under Application, select VERTICAL and 8-pin connection.
Configuration
You can enter a title for the configuration under Name.
You can enter the name of the person who created the configuration under Author.
You can describe the configuration in detail under Description.
The Configurator Version is entered by the system and cannot be changed.
The Check sum is entered by the system and cannot be changed.
The Creation date is entered by the system and cannot be changed.
Device
You can enter a title for the connected device under Name.
Click on the arrow
of OSSD pairs is already selected.
4. Select Warning zone = 1.
Operating Manual PSEN sc M 3.0/5.5 08-12
1005055-EN-03
. The next window is opened: Output configuration. The number
| 79