Spectra Logic Spectra 10000 User Manual page 87

10kdev_.book Page 75 Friday, March 12, 1999 9:44 AM
ST->DT (Byte 05, bit 3)
This field identifies the support for the Move Medium (A5h) command from a storage
element (carousel slot) to a data transfer element (tape drive). The value returned for this
field is 1.
ST->I/E (Byte 05, bit 2)
This field identifies the support for the Move Medium (A5h) command from a storage
element (carousel slot) to the import/export element (rotary door). The value returned
for this field is 1.
ST->ST (Byte 05, bit 1)
This field identifies the support for the Move Medium (A5h) command from a storage
element (carousel slot) to a storage element (carousel slot). The value returned for this
field is 1.
ST->MT (Byte 05, bit 0)
This field identifies the support for the Move Medium (A5h) command from a storage
element (carousel slot) to the medium transport element (gripper arm). The value
returned for this field is 1.
I/E->DT (Byte 06, bit 3)
This field identifies the support for the Move Medium (A5h) command from the import/
export element (rotary door) to a data transfer element (tape drive). The value returned
for this field is 1.
I/E>I/E (Byte 06, bit 2)
This field identifies the support for the Move Medium (A5h) command from the import/
export element (rotary door) to the import/export element. The value returned for this
field is 1. However, no motion takes place since there is only one entry/exit port.
I/E->ST (Byte 06, bit 1)
This field identifies the support for the Move Medium (A5h) command from the import/
export element (rotary door) to a storage element (carousel slot). Since this command is
not valid for the library, the value returned for this field is 1.