Spectra Logic Spectra 10000 User Manual page 123

Automated tape library
Hide thumbs Also See for Spectra 10000:
Table of Contents

Advertisement

10kdev_.book Page 113 Friday, March 12, 1999 9:44 AM
Command Specific Information (Bytes 08 - 11)
The library does not support any commands which provide command-specific
information. The values returned for this field are 00h.
Additional Sense Code (Byte 12, bits 7-0)
This field indicates further information related to the error or exception condition as
reported in the Sense Key field. For a list of ASC values and their meanings, refer to
Appendix B of the Spectra 10000 User's Guide.
Additional Sense Code Qualifier (Byte 13, bits 7-0)
This field indicates detailed information related to the ASC. For a list of ASCQ values
and their meanings, refer to Appendix B of the Spectra 10000 User's Guide.
Field Replaceable Unit Code (Byte 14, bits 7-0)
A non-zero value in this field defines a device-specific mechanism or a unit that has failed.
A value of 0 indicates that no specific mechanism or unit has been identified to have
failed, or that the data is not available. The field-replaceable units are:
Library
Drive 1
Drive 2
Drive 4
SKSV (Byte 15, bit 7)
When the Sense Key Specific Valid bit is set to 1, the data in Byte 15, Bits 6 - 0 and Bytes
16 and 17 are valid for the command receiving the Check Condition status.
Sense Key Specific (Byte 16, bits 6-0, and Bytes 17 - 18)
When SKSV is set to 1, the information contained in this field is dependent on the value
of the Sense Key.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Spectra 10000 and is the answer not in the manual?

Questions and answers

Table of Contents