Spectra Logic Spectra 10000 User Manual page 65

10kdev_.book Page 53 Friday, March 12, 1999 9:44 AM
Additional Length (Byte 04, bits 7-0)
The value returned for this field is 21h, indicating that there are 33 additional bytes of
Additional Inquiry Data available to be returned to the initiator. These bytes are defined
in the remainder of this section.
RelAdr (Byte 07, bit 7)
The library does not support Relative Addressing. The value returned for this field is 0.
WBus 32 (Byte 07, bit 6)
The library does not support 32-bit wide bus transfers. The value returned for this field
is 0.
WBus 16 (Byte 07, bit 5)
The library does not support 16-bit wide bus transfers. The value returned for this field
is 0.
Sync (Byte 07, bit 4)
The library does not support synchronous data transfer. The value returned for this field
is 0.
Linked (Byte 07, bit 3)
The library does not link commands. The value returned for this field is 0.
CmdQue (Byte 07, bit 1)
The library does not support tagged command queuing. The value returned for this field
is 0.
SftRe (Byte 07, bit 0)
The library does not support the soft reset alternative in response to a reset condition.
The value returned for this field is 0. All SCSI resets are hard resets and do the following:
clear all I/O processes, release all SCSI device reservations, return to initial operating
modes, and reset the Unit Attention flag.