G Beeper On/Off; H Help - Spectra Logic Spectra 10000 User Manual

10kdev_.book Page 17 Friday, March 12, 1999 9:44 AM
•
0: Library
•
1: Drive 1
•
2: Drive 2
•
3: Drive 3
•
4: Drive 4
Errors:
The
Request Sense
the
Request Sense
issuing a

G Beeper On/Off

The Beeper On/Off command turns the library beeper on or off.
Format
G STATE, [off duration] <CR>
•
state 0: beeper on
•
state 1: beeper off
The [
off duration]
default is 1 second.
The beeper remains on after receiving a 1 until a key is pressed on the front panel, the
power is turned off, or the beeper is disabled with the
The beeper state is indicated as part of the SSCL interface state. See
page 4, and command
Errors:
The Beeper On/Off command returns an error for values other than zero or one.

H Help

The HELP command returns a list of the SSCL commands.
Format
H <CR>
command always returns an
command is never constructed, and the sense data available before
remains valid.
Request Sense
is optional and is the number of seconds between beeps. The
to the host. Sense data for
ACK
command.
G
on page 13.
on