1. Manuals
  2. Brands
  3. Spectra Logic Manuals
  4. Storage
  5. Spectra 10000
  6. Replacement manual

Spectra Logic Spectra 10000 Replacement Manual

Front panel on tape library
Hide thumbs Also See for Spectra 10000:
Table of Contents

Advertisement

Quick Links

Download this manual
Spectra 10000
Front Panel
™
Replacement Guide
P.N. 90840070 Revision F

Advertisement

Table of Contents
loading

Related Manuals for Spectra Logic Spectra 10000

Summary of Contents for Spectra Logic Spectra 10000

  • Page 1 Spectra 10000 Front Panel ™ Replacement Guide P.N. 90840070 Revision F...

  • Page 2: Notices

    Information furnished in this manual is believed to be accurate and reliable. However, no responsibility is assumed by Spectra Logic for its use. Due to continuing research and development, Spectra Logic may revise this publication from time to time without notice, and reserves the right to change any product specification at any time without notice.

  • Page 3: Table Of Contents

    Remove Cover ......................6 Remove Front Panel....................8 Disconnect Front Panel Cables................11 Remove Grill and End Cap .................. 12 Replace Grill and End Cap .................. 14 Replace Front Panel..................... 15 Replace Library Cover ..................19 Finish........................21 Spectra 10000 Front Panel Replacement Guide...

  • Page 4: Introduction

    The Spectra 10000 utilizes the BullFrog architecture for robotic tape libraries developed by Spectra Logic. BullFrog architecture can be configured with 20 or 40 cartridges and up to four tape drives. BullFrog architecture supports both SCSI-2 (Single-Ended and HVD) and Fibre Channel interfaces.

  • Page 5: Prepare Library And Host System

    4. Move the library to a location where you have access to all sides of the library. Warning: The library is heavy, about 56 lbs (25 kg). Get help when moving the library. Spectra 10000 Front Panel Replacement Guide...

  • Page 6: Remove Cover

    1. Use the flat head screwdriver to remove the library cover screws on the rear of the library (Figure 1). Figure 1 Remove the library cover screws. 2. Slide the cover back about one-half of an inch (Figure 2). Figure 2 Slide cover back. Spectra 10000 Front Panel Replacement Guide...
  • Page 7 Remove Cover 3. Lift and remove the library cover (Figure 3). Figure 3 Lift and remove cover. Spectra 10000 Front Panel Replacement Guide...

  • Page 8: Remove Front Panel

    Figure 4 Turn the library on its side. 2. Use the #2 Phillips screwdriver to remove the single top screw on the front panel (Figure 5). Figure 5 Remove the top front panel screw. Spectra 10000 Front Panel Replacement Guide...
  • Page 9 Remove Front Panel 3. Turn the library around and remove the bottom front panel screw (Figure 6). Figure 6 Remove bottom front panel screw. 4. Carefully lay the library down flat. Spectra 10000 Front Panel Replacement Guide...
  • Page 10 6. Remove the two front panel screws on the left side of the library (Figure 8). Figure 8 Remove left side front panel screws. 7. Pull the front panel gently away from the library. Spectra 10000 Front Panel Replacement Guide...

  • Page 11: Disconnect Front Panel Cables

    1. Snap out the ejector arms on the ribbon cable header to release ribbon cable (Figure 2. Squeeze the release latch on the AC power cable to release it from its header (Figure AC Power Cable Ribbon Cable Figure 9 Detach front panel cabling. Spectra 10000 Front Panel Replacement Guide...

  • Page 12: Remove Grill And End Cap

    (Figure 10). Figure 10 Insert credit card into grill ejector mechanism. 4. Release the grill from the front panel (Figure 11). Figure 11 Release grill from front panel. 5. Remove grill. Spectra 10000 Front Panel Replacement Guide...
  • Page 13 Remove Grill and End Cap 6. Use flat head screwdriver to pry off the end cap by twisting the screwdriver. Figure 12 Remove the end cap. Spectra 10000 Front Panel Replacement Guide...

  • Page 14: Replace Grill And End Cap

    1. Snap the new end cap on the right side of the front panel. 2. Place a dust filter in the new grill. 3. Install the new grill. Figure 13 Install the new grill. Spectra 10000 Front Panel Replacement Guide...

  • Page 15: Replace Front Panel

    Figure 14 Attach front panel cabling. 3. Position the front panel on the front of the library. 4. Using the new screws provided in your Spectra 10000 Front Panel Replacement Kit, attach the right side of the front panel (Figure 15).
  • Page 16 Replace Front Panel 5. Attach the left side of the front panel (Figure 16). Figure 16 Attach the left side of the front panel. Spectra 10000 Front Panel Replacement Guide...
  • Page 17 1. Turn the library on its side, with the power supply on the bottom (Figure 17). Figure 17 Turn the library on its side. 2. Attach the single top screw on the front panel (Figure 18). Figure 18 Attach the top of the front panel. Spectra 10000 Front Panel Replacement Guide...
  • Page 18 Replace Front Panel 3. Attach the single bottom screw of the front panel (Figure 19). Figure 19 Attach the bottom of the front panel. Spectra 10000 Front Panel Replacement Guide...

  • Page 19: Replace Library Cover

    Replace Library Cover 4. Replace the library cover (Figure 20). Figure 20 Replace cover. 5. Slide the cover forward against the front panel (Figure 21). Figure 21 Slide cover forward. Spectra 10000 Front Panel Replacement Guide...
  • Page 20 1. Use the flat blade screwdriver to replace the library cover screws on the rear of the library (Figure 22). Figure 22 Replace the library cover screws. Spectra 10000 Front Panel Replacement Guide...

  • Page 21: Finish

    This completes the Spectra 10000 front panel replacement procedure. If you have difficulty If you need further assistance with any part of these procedures, call Spectra Logic Technical Support at (800) 227-4637 or (303) 449-6444, extension 3175. Spectra 10000 Front Panel Replacement Guide...

Table of Contents