Spectra Logic Spectra 10000 User Manual page 76

10kdev_.book Page 64 Friday, March 12, 1999 9:44 AM
Auto (Byte 02, bit 2)
This bit controls the Automatic Reading of barcode labels if a barcode reader is installed.
Cartridges are automatically scanned. If this bit is 0 the barcode is not automatically read.
For a detailed description, see on page 45.
ChkSum (Byte 02, bit 1)
This field Enables or Disables barcode checksum verification. If this bit is 1, barcodes are
checksum verified as they are scanned. If a checksum mismatch is encountered the
barcode information is assumed invalid and not stored in the library's inventory. This bit
must be disabled (ChkSum = 0) if the 4mm barcode labels do not have checksums
embedded in their barcode information.
EBarCo (Byte 02, bit 0)
This field Enables/Disables the barcode reader. If this bit is 1, the barcode reader is
enabled. A bit EBarCo = 0 disables the barcode reader.
Queued Unload (Byte 03, bits 7-0)
If this byte is 0, the library's queued unload function is disabled. If this byte is non-zero,
the library's queued unload function is enabled.
Lock Touch Screen (Byte 04, bits 7-0)
If this byte is 0, all library touch screens are unlocked. If this byte is non-zero, all library
touch screens are locked.
Chapter 6