Field Definitions - Spectra Logic Spectra 10000 User Manual

10kdev_.book Page 112 Friday, March 12, 1999 9:44 AM

Field Definitions

Extended Sense Data (Byte 01, bits 7-0)
The value for this field is 0.
Sense Key (Byte 02, bits 3-0)
The values contained in the Sense Key field are defined below. This table includes only
those sense key values supported by the library.
Hex Values
00h
02h
04h
05h
06h
09h
Information Bytes (Bytes 03 - 06)
This sense field is not supported by the library.
Additional Sense Length (Byte 07, bits 7-0)
This byte indicates the Additional Sense Length provided by the library, excluding this
byte. The value is 0Ah.
Chapter 13
Meaning Explanation
No Sense Indicates that there is no specific Sense Key
information to be reported for the library.
Not Ready Indicates that the library cannot be accessed.
Operator intervention may be required to correct
this condition.
Hardware Error Indicates that the library detected a non-
recoverable Hardware Error failure while
performing the command or during a self-test.
Illegal Request Indicates that there was an illegal parameter in
the command descriptor block or in the additional
parameters supplied as data for some command,
or the library is in the wrong mode to execute the
command.
Unit Indicates that the data cartridge inventory may
Attention have been violated.
Vendor Unique Indicates vendor-specific information.