Cli Monitoring; Listing Parameters - Safran WR-ZEN Series User Manual

4.5

CLI Monitoring

The gpa_ctrl command tool can be used to monitor the current value and state
of all the parameters in the WRZ-OS.
4.5.1

Listing parameters

If the user directly executes gpa_ctrl without any arguments, it will list all the
parameters of the WRZ-OS. Then, by specifying some arguments and options the
user can slightly modify its usage.
gpa_ctrl [OPTIONS] [<module_name> [<path> [<write_val>]]]
CHAPTER •
4 WR-ZEN Series User Manual Rev. v5.1
Figure 4-10: wrz_config interface. File in which to save the new applied con-
figuration
6. Select Exit or press <Esc> to return to the command line.
Note:
Verify network configuration after reboot: Network configuration
changes are only applied at startup. Thus, it is recommended to
reboot the device to verify that the IP settings has been properly
updated using the typical ifconfig <ifname> command or through
gpa_ctrl tool.
4.5 CLI Monitoring
55