Trap Configuration - Safran WR-ZEN Series User Manual

7.2.2.3

Trap configuration

The SNMP traps generated by the device can be configured using the traps sub-
tree under snmp.
13.3900.1
13.3900.2-5
13.3900.6
13.3900.7
13.3900.8
13.3900.9
CHAPTER •
7 WR-ZEN Series User Manual Rev. v5.1
Note: Trap definition: An extended definition of the traps can be
found in the MIB file in /wr/etc/snmp/SEVEN-PRODUCT-MIB.txt
Note: Tracked parameters: A selection of parameters in the devices
have been performed and flagged like tracked parameters. These
parameters create an alert each time that their value is changed.
OID Name
Community
name
NMS IP 1-4
Start/shutdown
Modules
Start/Close
Prms tracked
Prms alert
Note: Default traps configuration: By default, all traps are enabled
using the public SNMPv2 community for informative purposes.
Value Type
<String> (i.e., public)
<IP address> (i.e., 192.168.1.5 or
192.168.1.0/24)
<Enum>
•
• Disabled
<Enum>
•
• Disabled
<Enum>
•
• Disabled
<Enum>
•
• Disabled
7.2 SNMP
Description
Name of the com-
munity.
Authentication
encryption pro-
tocolDestination NMS
IP address.
Enable/disable star-
tup and shutdown
Enabled
traps.
Enable/disable mod-
ule launch or close
Enabled
traps.
Enable/disable
tracked parameters
Enabled
traps.
Enable/disable traps
when a parameter is
Enabled
in an alert status or
back to a normal
status.
137