Miscellaneous - Safran WR-ZEN Series User Manual

5.8 Miscellaneous
OID
3.7220.2
3.7220.0
3.7220.1
3.7220.2
5.8

Miscellaneous

This section, found by navigating to Configuration > Misc in the Web GUI, allows
to configure various settings that do not fit in any previous categories. The para-
meters can be seen below:
3.8010.x
3.8010.0
108
Name
State
Time Learning
Time Holdover
Trigger Origin
Note: Holdover and FOCA: As mentioned above FOCA only
switches between timing source when a failure is detected. This
means that if the active timing source of a device is HO, it will stick
to it until reaching the expired states (Failure state of HO).
OID Name
misc/cfg/xxx
Time Zone
Value Type
<Enum> Current state of the holdover timing
0. UNAVAILABLE source as explained in the intro-
1. DISABLED duction of the section. If the holdover
2. LOCKING is not detected the corresponding
3. LEARNING state if UNAVAILABLE. The user can
4. READY also manually force it as DISABLED in
5. ACTIVATED case to avoid triggered it.
6. EXPIRED
<Integer> Time the holdover has been in
LEARNING state (in seconds)
<Integer> Seconds elapsed since holdover activ-
ation
<Enum> Trigger origin of last one launched
• NONE
• MANUAL
• PPS_DRIFT
• TRACK_LOST
• LINKDOWN
• EXTCLK_DOWN
• EXTPSS_DOWN
• CLK_DRIFT
Value Type
Miscellaneous Timing con-
figuration.
<String> Configure the device time zone such that
local time is properly displayed (web
interface, LCD screen).
CHAPTER
5
Description
Description
•
WR-ZEN Series User Manual Rev. v5.1