Local Interconnect Network (Lin); Universal Serial Bus (Usb); I 2 C Bus (Inter-Ic Bus) - Renesas RX Series User Manual

Starter kit for cubesuite+. rx111 group
Hide thumbs Also See for RX Series:
Table of Contents

Advertisement

RSKRX111
5.8

Local Interconnect Network (LIN)

A LIN transceiver IC is fitted to the RSK, and connected to the Extended serial mode MCU peripheral. For
further details regarding the supported modes of operation, please refer to the RX111 Group Hardware
Manual.
Connections between the LIN connector and the microcontroller are listed in Table 5-6 below.
LIN Signal
LINTXD
LIN Transmit Signal
LINRXD
LIN Receive Signal
LINNSLP
LIN Transceiver Device Sleep Control
5.9

Universal Serial Bus (USB)

This RSK device is fitted with a USB host socket (type A) and a function socket (type Mini B). USB module
USB0 is connected to the host and function socket, and can operate as either a host or function device. The
connections for the USB0 module are shown in Table 5-7 below.
USB Signal
USB0DP
USB0DM
USB0VBUS
USB0VBUSEN
USB0OVRCURA
USB0OVRCURB
USB0EXICEN
USB0ID
Note:
When evaluating OTG, ensure to replace the default USB connector (USB0_3) with a USB Micro-AB
connector.
Connectors such as the one manufactured by Hirose Electric with part number ZX62R-AB-5P, can be
used.
2
5.10
I
C Bus (Inter-IC Bus)
The RX111 features one I
(Electronically-Erasable Programmable Read Only Memory). Specific details of the EEPROM device and the
connections can be found in the board schematics.
The first bit of the device address can be configured by modifying option links – refer to §6 for further details.
R20UT2193EG0200 Rev. 2.00
Apr 14, 2014
Function
Table 5-6: LIN Connections
Function
Positive differential data signal.
Negative differential data signal.
Cable monitor pin.
VBUS power supply enable.
Over-current detection signal A.
Over-current detection signal B.
OTG Low-power control signal
ID input signal
Table 5-7: USB0 Module Connections
2
C (Inter-IC Bus) interface modules. RIIC is connected to a 16Kbit EEPROM
5.
MCU
Port
PE1
PE2
PB1
MCU
Port
USB0_DP
USB0_DM
P16
P26
PB3
PC7
PC6
PC5
User Circuitry
Pin
50
49
37
Pin
23
22
18
3
36
27
28
29
Page 17 of 42

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rx100 seriesRskrx111

Table of Contents