Emulator Hardware Configuration - Renesas E1 User Manual

E1/E20 Emulator

1.6. Emulator Hardware Configuration

As shown in Figures 1.2 and 1.3, the emulator consists of a main emulator unit, a USB interface cable, and a user-
system interface cable. The emulator is connectable to the host computer via a USB port compliant with USB 2.0
(Full-Speed/High-Speed) or USB 1.1.
USB interface cable
Figure 1.2 E1 Hardware Configuration
USB interface cable
Note: The 38-pin to 14-pin conversion adapter is used to connect the E20 to a board on which a 14-pin
connector is mounted.
Figure 1.3 E20 Hardware Configuration
R20UT0398EJ0401 Rev.4.01
Mar 15, 2016
ACT
SELF CHECK
E1 main emulator unit
VCC
ACT RESET
RUN
SELF CHECK
E20 main emulator unit
VCC
RESET
User-system interface cable
RUN
Optional 38-pin to 14-pin
conversion adapter
included in the package
User-system interface cable
Outline
Page 15 of 40