Table of Contents
Advertisement
Setting SNMPv3 Trap
Command operation
■
1. Use the showsnmp(8) command to display SNMP settings.
<Example>
Display of the status when settings have been made for
SNMPv1 and SNMPv2c
XSCF> showsnmp
Agent Status:
Agent Port:
System Location:
System Contact:
System Description: DataBaseServer
Trap Hosts:
Hostname
Port
--------
----
host1
162
host2
1162
SNMP V1/V2c:
Status: Enabled
Community String: public
2. Use the setsnmp(8) command to make SNMPv3 trap settings.
<Example>
Specify a user name, an engine ID, an authentication
algorithm, authentication and encryption passwords, and the host
name or IP address of the trap destination
XSCF> setsnmp addv3traphost -u yyyyy -n 0x### -r SHA host3
Authentication Password: *****
Encryption Password: xxxxxxxx
Enabled
161
MainTower21F
foo@example.com
Type
Community String
----
----------------
v1
public
v2
public
Username
Auth Protocol
--------
--------------
n/a
n/a
n/a
n/a
Chapter 2
Setting Up XSCF 2-137
Advertisement
Table of Contents
