112
7.5
Tabletop
Ensure that the tabletop has sufficient load-bearing capacity and
strength. If you want to make your own tabletop, use the dimen-
sions given in the diagram Appendix ( p. 141) as a template.
7.5.1
Completing the tabletop
The tabletop is optional. Drawings are provided in the appendix
to allow you to independently assemble a tabletop ( p. 141).
Fig. 53: Completing the tabletop
①
②
③
(1) - Cable duct
(2) - Slot
(3) - Drawer
(4) - Oil pan
To complete the tabletop:
1.
Screw the drawer (3) with the left-hand bracket to the under-
side of the tabletop.
Operating Instructions 667 PREMIUM - 02.0 - 01/2018
⑦
⑥
⑤
④
(5) - Recess
(6) - Hole
(7) - Reel stand
Setup