3.4
Preload, process, and unload the slides
BOND-PRIME User Manual, 91.7500.501 A07
Copyright © 2023 Leica Biosystems Melbourne Pty Ltd
1.
Check that the Preload Drawer status LED is green, and
then pull the handle to open the drawer.
2.
Preload 1 - 24 slides label-side-up into any empty positions.
Make sure no labels overhang.
If there are any priority slides, preload these first and then
close the Preload Drawer.
You can preload up to six dewaxed slides.
Dewaxed slides must start processing
within the "acceptable starting period",
otherwise an alert appears on the
touchscreen.
Slides that are scanned together are
scheduled together.
3.
Check that all slides are correctly located in the Slide
Drawer Insert, and then close the Preload Drawer.
Chapter 3 Quick start
105