3.2
Start the processing module
BOND-PRIME User Manual, 91.7500.501 A07
Copyright © 2023 Leica Biosystems Melbourne Pty Ltd
1.
Power on the processing module.
a.
Open the Reservoir Cabinet door.
b.
Turn the AC power switch clockwise.
c.
Close the Reservoir Cabinet door.
2.
When the processing module is turned on, it initializes
before displaying the Log In Screen. This process takes
from 8 to 15 minutes. If the processing module fails to
initialize, refer to
5.1 Failure to
The Status screen is displayed.
Chapter 3 Quick start
initialize.
101