A1.3 Specimen Slides And Gripper Mechanism; A1.4 Cv5030 - Validated And Recommended Specimen Slides - Leica CV5030 Instructions For Use Manual

A1.3 Specimen slides and gripper mechanism

The new gripper mechanism and the new specimen slide gripper can be identified by the red
anodized gripper fingers. This change applies beginning with serial number 3000 for the CV5030.
Notice! The gripper mechanism for the specimen slides is never allowed to be changed
or manipulated during necessary cleaning measures within the instrument. With regard
to the red anodized gripper fingers, make sure that they are never manually spread,
pressed together or bent.
The new gripper mechanism is suitable for all specimen slides that have been manufactured in
accordance with ISO 8037-1:1986 and have the following edge properties:
1.) 90° ground
2.) 90° cut
3.) 45° ground
4.) Mounted edges (ground or prism-shaped)
5.) Clipped corners with the above-mentioned edge properties
A1.4 CV5030 – Validated and recommended specimen slides
Name
Snowcoat
Snowcoat
Snowcoat
Snowcoat Pearl
X-tra Slides
X-tra Adhesive Slides
X-tra Adhesive Slides
Micro-Slides
Apex Superior Adhesive Slides
Superfrost "Plus" white (Menzel
glasses)
Polysine (Menzel glasses)
Leica CV5030 – Robotic Coverslipper
Appendix A Application-related notes and recommendations
Manufacturer
Leica - Surgipath
Leica - Surgipath
Leica - Surgipath
Leica - Surgipath
Leica - Surgipath
Leica - Surgipath
Leica - Surgipath
Leica - Surgipath
Leica - Surgipath
Leica - Surgipath
Leica - Surgipath
Properties and description
Ground edges 90°
Ground edges 45°
Clipped corners
Ground edges 90°
Ground edges 90° Clipped corners
Clipped corners
Ground edges 90°
Ground edges 90°
Ground edges 90°
Ground edges 90°
Ground edges 90°
111