High-Speed Robot - Leica BOND-PRIME User Manual

1.12.1 High-Speed Robot

Legend
1 ID Imager
2 Suction Cup
For moving slides from Preload Drawer to ARC
Modules to Unload Drawer.
Refer to 1.4 Preload and Unload Drawers
1.12.4 ARC (Active Reagent Control)
WARNING: If the High-Speed Robot gets stuck in a position above the Work Surface, do not attempt
to manually move it. Contact customer support about the problem.
See also:
4.10 Clean the Suction Cup
l
4.11 Replace the Suction Cup
l
BOND-PRIME User Manual, 91.7500.501 A07
Copyright © 2023 Leica Biosystems Melbourne Pty Ltd
3 ARC Probe
Dispenses reagents obtained from reagent to ARC
Modules from:
l
and
Modules.
l
4 Bulk Reagent Probes (also see next page)
Dispense bulk reagents from bulk reagent
containers to ARC Modules. Refer to
Containers.
Chapter 1 BOND-PRIME hardware
containers loaded on Reagent Platform.
Refer to 1.6 Reagent Platform.
mixed reagents obtained from Mixing Well
Plate. Refer to 1.12.6 Mixing Well Plate.
1.7 Bulk
44