1.12.6 Mixing Well Plate
Legend
The orientation of the Mixing Well Plate on the Mixing Block is not important, however it must be seated correctly
within the holder.
The processing module will not complete initialization if there is no Mixing Well Plate installed.
See also:
4.14 Use the BOND-PRIME ARC Refresh Kit
l
BOND-PRIME User Manual, 91.7500.501 A07
Copyright © 2023 Leica Biosystems Melbourne Pty Ltd
1 Mixing Well Plate
This is where chromogen reagents are mixed before being
dispensed onto slides in the ARC Modules by the ARC Probe.
Refer to
1.12.4 ARC (Active Reagent Control) Modules
1.12.1 High-Speed
Robot.
Chapter 1 BOND-PRIME hardware
and
50